We found 13 results that contain "bio analysis"

Posted on: #iteachmsu
Friday, Sep 8, 2023
Department of Haematology
Department of Haematology
Notes

Full blood counts are performed on automated equipment and provide haemoglobin concentration, red cell indices, white cell count (with a differential count) and platelet count.
The presence of abnormal white cell and red cell morphology is flagged by the analysers.
Blood films may be inspected to confirm and interpret abnormalities identified by the cell counter, or to look for certain specific haematological abnormalities.
Grossly abnormal FBC results and abnormal blood films will be phoned through to the requestor.
There is no need to request a blood film to obtain a differential white count. It is, however, important that clinical details are provided to allow the laboratory to decide whether a blood film, in addition to the automated analysis, is required.
Under some circumstances a differential is not routinely performed, e.g. pre-op, post-op, antenatal and postnatal requests.
Full Blood Counts are performed at CGH and GRH
See also: Reticulocyte Count

The FBC comprises the following tests
Standard

Haemoglobin (Hb)
White Blood Count (WBC)
Platelet Count (Plt)
Red Cell Count (RBC)
Haematocrit (HCT)
Mean Cell Volume - Red cell (MCV)
Mean Cell Haemoglobin (MCH)

Differential White Cell Count (where applicable)

Neutrophils
Lymphocytes
Monocytes
Eosinophils
Basophils

And if appropriate

Blood Film

Sample Requirements
2ml or 4ml EDTA sample or a Paediatric 1ml EDTA sample.

 

Sample Storage and Retention

Pre analysis storage: do not store, send to laboratory within 4 hours.
Sample retention by lab: EDTA samples are retained for a minimum of 48 hours at 2-10°C
Transport of samples may affect sample viability, i.e. FBC results will degenerate if exposed to high temperatures, such as prolonged transportation in a hot car in summer.

This test can be added on to a previous request as long as there is sufficient sample remaining and the sample is less than 24 hours old.
Turnaround Times

Clinical emergency: 30 mins
Other urgent sample: 60 mins
Routine: within 2 hours

Reference Ranges


If references ranges are required for paediatric patients please contact the laboratory for these.

Parameter Patient Reference Range Units Haemoglobin Adult Male 130 - 180 g/L   Adult Female 115 - 165 g/L Red Cell Count Adult Male 4.50 - 6.50 x10^12/L   Adult Female 3.80 - 5.80 x10^12/L Haematocrit Adult Male 0.40 - 0.54 L/L   Adult Female 0.37 - 0.47 L/L Mean Cell Volume Adult 80 - 100 fL Mean Cell Haemoglobin Adult 27 - 32 pg White Cell Count Adult 3.6 - 11.0 x10^9/L Neutrophils Adult 1.8 - 7.5 x10^9/L Lymphocytes Adult 1.0 - 4.0 x10^9/L Monocytes Adult 0.2 - 0.8 x10^9/L Eosinophils Adult 0.1 - 0.4 x10^9/L Basophils Adult 0.02 - 0.10 x10^9/L Platelet Count Adult 140 - 400 x10^9/L


 




 
Posted by: Super Admin
post image
Posted on: #iteachmsu
Tuesday, Sep 26, 2023
Full blood counts -- New
Department of Haematology
Notes

Full blood counts are performed on automated equipment and provide haemoglobin concentration, red cell indices, white cell count (with a differential count) and platelet count.
The presence of abnormal white cell and red cell morphology is flagged by the analysers.
Blood films may be inspected to confirm and interpret abnormalities identified by the cell counter, or to look for certain specific haematological abnormalities.
Grossly abnormal FBC results and abnormal blood films will be phoned through to the requestor.
There is no need to request a blood film to obtain a differential white count. It is, however, important that clinical details are provided to allow the laboratory to decide whether a blood film, in addition to the automated analysis, is required.
Under some circumstances a differential is not routinely performed, e.g. pre-op, post-op, antenatal and postnatal requests.
Full Blood Counts are performed at CGH and GRH
See also: Reticulocyte Count

The FBC comprises the following tests
Standard

Haemoglobin (Hb)
White Blood Count (WBC)
Platelet Count (Plt)
Red Cell Count (RBC)
Haematocrit (HCT)
Mean Cell Volume - Red cell (MCV)
Mean Cell Haemoglobin (MCH)

Differential White Cell Count (where applicable)

Neutrophils
Lymphocytes
Monocytes
Eosinophils
Basophils

And if appropriate

Blood Film

Sample Requirements
2ml or 4ml EDTA sample or a Paediatric 1ml EDTA sample.

 

Sample Storage and Retention

Pre analysis storage: do not store, send to laboratory within 4 hours.
Sample retention by lab: EDTA samples are retained for a minimum of 48 hours at 2-10°C
Transport of samples may affect sample viability, i.e. FBC results will degenerate if exposed to high temperatures, such as prolonged transportation in a hot car in summer.

This test can be added on to a previous request as long as there is sufficient sample remaining and the sample is less than 24 hours old.
Turnaround Times

Clinical emergency: 30 mins
Other urgent sample: 60 mins
Routine: within 2 hours

Reference Ranges


If references ranges are required for paediatric patients please contact the laboratory for these.

Parameter Patient Reference Range Units Haemoglobin Adult Male 130 - 180 g/L   Adult Female 115 - 165 g/L Red Cell Count Adult Male 4.50 - 6.50 x10^12/L   Adult Female 3.80 - 5.80 x10^12/L Haematocrit Adult Male 0.40 - 0.54 L/L   Adult Female 0.37 - 0.47 L/L Mean Cell Volume Adult 80 - 100 fL Mean Cell Haemoglobin Adult 27 - 32 pg White Cell Count Adult 3.6 - 11.0 x10^9/L Neutrophils Adult 1.8 - 7.5 x10^9/L Lymphocytes Adult 1.0 - 4.0 x10^9/L Monocytes Adult 0.2 - 0.8 x10^9/L Eosinophils Adult 0.1 - 0.4 x10^9/L Basophils Adult 0.02 - 0.10 x10^9/L Platelet Count Adult 140 - 400 x10^9/L
Authored by: Vijaya
post image
Posted on: #iteachmsu
Thursday, Oct 12, 2023
Department of Haematology
Department of Haematology
Notes

Full blood counts are performed on automated equipment and provide haemoglobin concentration, red cell indices, white cell count (with a differential count) and platelet count.
The presence of abnormal white cell and red cell morphology is flagged by the analysers.
Blood films may be inspected to confirm and interpret abnormalities identified by the cell counter, or to look for certain specific haematological abnormalities.
Grossly abnormal FBC results and abnormal blood films will be phoned through to the requestor.
There is no need to request a blood film to obtain a differential white count. It is, however, important that clinical details are provided to allow the laboratory to decide whether a blood film, in addition to the automated analysis, is required.
Under some circumstances a differential is not routinely performed, e.g. pre-op, post-op, antenatal and postnatal requests.
Full Blood Counts are performed at CGH and GRH
See also: Reticulocyte Count

The FBC comprises the following tests
Standard

Haemoglobin (Hb)
White Blood Count (WBC)
Platelet Count (Plt)
Red Cell Count (RBC)
Haematocrit (HCT)
Mean Cell Volume - Red cell (MCV)
Mean Cell Haemoglobin (MCH)

Differential White Cell Count (where applicable)

Neutrophils
Lymphocytes
Monocytes
Eosinophils
Basophils

And if appropriate

Blood Film

Sample Requirements
2ml or 4ml EDTA sample or a Paediatric 1ml EDTA sample.

 

Sample Storage and Retention

Pre analysis storage: do not store, send to laboratory within 4 hours.
Sample retention by lab: EDTA samples are retained for a minimum of 48 hours at 2-10°C
Transport of samples may affect sample viability, i.e. FBC results will degenerate if exposed to high temperatures, such as prolonged transportation in a hot car in summer.

This test can be added on to a previous request as long as there is sufficient sample remaining and the sample is less than 24 hours old.
Turnaround Times

Clinical emergency: 30 mins
Other urgent sample: 60 mins
Routine: within 2 hours

Reference Ranges


If references ranges are required for paediatric patients please contact the laboratory for these.

Parameter Patient Reference Range Units Haemoglobin Adult Male 130 - 180 g/L   Adult Female 115 - 165 g/L Red Cell Count Adult Male 4.50 - 6.50 x10^12/L   Adult Female 3.80 - 5.80 x10^12/L Haematocrit Adult Male 0.40 - 0.54 L/L   Adult Female 0.37 - 0.47 L/L Mean Cell Volume Adult 80 - 100 fL Mean Cell Haemoglobin Adult 27 - 32 pg White Cell Count Adult 3.6 - 11.0 x10^9/L Neutrophils Adult 1.8 - 7.5 x10^9/L Lymphocytes Adult 1.0 - 4.0 x10^9/L Monocytes Adult 0.2 - 0.8 x10^9/L Eosinophils Adult 0.1 - 0.4 x10^9/L Basophils Adult 0.02 - 0.10 x10^9/L Platelet Count Adult 140 - 400 x10^9/L
Posted by: Super Admin
post image
Posted on: #iteachmsu
post image
Department of Haematology
Department of Haematology
Notes

Full blood counts are pe...
Posted by:
Thursday, Oct 12, 2023
Posted on: #iteachmsu
Thursday, Jul 11, 2024
Article : internationally recognized certificate serves as proof of performance, strengthening both
https://www.bankrate.com/investing/stock-market-basics-for-beginners/Software testing is governed by seven principles:Absence of errors fallacy: Even if the software is 99% bug-free, it is unusable if it does not conform to the user's requirements. Software needs to be bug-free 99% of the time, and it must also meet all customer requirements.Testing shows the presence of errors: Testing can verify the presence of defects in software, but it cannot guarantee that the software is defect-free. Testing can minimize the number of defects, but it can't remove them all.Exhaustive testing is not possible: The software cannot be tested exhaustively, which means all possible test cases cannot be covered. Testing can only be done with a select few test cases, and it's assumed that the software will produce the right output in all cases. Taking the software through every test case will cost more, take more effort, etc., which makes it impractical.Defect clustering: The majority of defects are typically found in a small number of modules in a project. According to the Pareto Principle, 80% of software defects arise from 20% of modules.Pesticide Paradox: It is impossible to find new bugs by re-running the same test cases over and over again. Thus, updating or adding new test cases is necessary in order to find new bugs.Early testing: Early testing is crucial to finding the defect in the software. In the early stages of SDLC, defects will be detected more easily and at a lower cost. Software testing should start at the initial phase of software development, which is the requirement analysis phase.Testing is context-dependent: The testing approach varies depending on the software development context. Software needs to be tested differently depending on its type. For instance, an ed-tech site is tested differently than an Android app.
Posted by: Super Admin
post image
Posted on: #iteachmsu
Thursday, Jan 14, 2021
What Is Big Data? and How Big Data Works?
Big data:Big data refers to the large, diverse sets of information that grow at ever-increasing rates. It encompasses the volume of information, the velocity or speed at which it is created and collected, and the variety or scope of the data points being covered (known as the "three v's" of big data).

Big data is a great quantity of diverse information that arrives in increasing volumes and with ever-higher velocity.
Big data can be structured (often numeric, easily formatted and stored) or unstructured (more free-form, less quantifiable).
Nearly every department in a company can utilize findings from big data analysis, but handling its clutter and noise can pose problems.
Big data can be collected from publicly shared comments on social networks and websites, voluntarily gathered from personal electronics and apps, through questionnaires, product purchases, and electronic check-ins.
Big data is most often stored in computer databases and is analyzed using software specifically designed to handle large, complex data sets.
How Big Data Works
Big data can be categorized as unstructured or structured. Structured data consists of information already managed by the organization in databases and spreadsheets; it is frequently numeric in nature. Unstructured data is information that is unorganized and does not fall into a predetermined model or format. It includes data gathered from social media sources, which help institutions gather information on customer needs.






 






Big data can be collected from publicly shared comments on social networks and websites, voluntarily gathered from personal electronics and apps, through questionnaires, product purchases, and electronic check-ins. The presence of sensors and other inputs in smart devices allows for data to be gathered across a broad spectrum of situations and circumstances.
Authored by: Rupali
post image